Canon ELPH130IS IXUS 140 User Manual page 68

_ Actlvatmn_ Flash
You can have the flash fire for each shot. For details on the flash range, see
Flash Range (_ 146).
Configure the setting.
@ Press the <_'> button, press the <'i><_>
buttons to choose [_], and then press the
<@> button.
Once the setting is complete, [_] is
displayed.
F ................
Shooting with Slow Synchro
With this option, the flash fires to increase the brightness of the main
subject (such as people) while the camera shoots at a slow shutter speed to
increase the brightness of the background that is out of the flash range.
For details on the flash range, see Flash Range ([,C: 146).
Configure the setting.
@ Press the <_'> button, press the <_><1_>
buttons to choose [_*], and then press
the <@> button.
Once the setting is complete, [_] is
displayed.
2 Shoot.
@ Even after the flash fires, ensure that
the main subject does not move until the
shutter sound is finished playing.
_ _ Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. Additionally, you should set [IS Mode]
to [Off] when using a tripod or other means to hold the camera still
--'"_"""--_--_'"'Sh'o'o't'in_, with the FE Lock
Just as with the AE lock (_:_-'59), you can lock the exposure for the flash
shots.
Set the flash to [_] (l _ 68).
2 Lock the flash exposure.
@ Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<,_> button.
The flash fires, and when
[EEL]
is
displayed, the flash output level is
retained.
@ To unlock FE, release the shutter button
and press the <A> button again. In this
case,
[EEL]
is no longer displayed.
3 Compose the shot and shoot.
o FE: Flash Exposure
@@
68