A Host Configuration Strings - Datalogic PowerScan D8530 Reference Manual

A HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration
using serial strings sent from the Host.
This method requires the RS-232, USB-Com, USB Bulk or USB Generic HID
The device configuration can be changed by receiving commands from the Host
through the current interface. When this method is used, the programming sequence
format is the following:
Command
$+
Enter configuration environment
Example:
$+ GBB1
Each configuration parameter setting removes the condition previously active for that
parameter.
Configuring some configuration commands, such as those of
advanced formatting, through strings may result very complex. For this
reason they are not provided in the following tables but can be
configured by using Datalogic Aladdin™ configuration program or
NOTE
referring to the related section in chapter 4 of this manual.
interface.
$-
Character sequence in following tables
GBA1 $- CR
Exit and save new configuration
Beeper tone 1
Beeper low intensity
Enter configuration environment
HOST CONFIGURATION STRINGS
CR
Carriage return character (0D Hex.)
Exit and Save configuration
Carriage return character (0D Hex.)
121