Removing A Media Card Reader; Media Card Reader - Dell Dimension E520 Service Manual

Removing and Installing Parts: Dell Dimension E520 Service Manual
11. Connect your computer and devices to their electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
12. Enter system setup (see

Media Card Reader

Removing a Media Card Reader

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.
1. Follow the procedures in
2. Remove the computer cover (see
3. Remove the drive panel (see
1 Media Card Reader (optional)
4. Disconnect the USB cable from the back of the Media Card Reader. Disconnect the other end of the cable from the USB
connector on the system board (see
computer.
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
System Setup) and select the appropriate Diskette Drive option.
Before You Begin.
Removing the Computer
Removing the Drive Panel).
2
System Board
Cover).
cable 3 USB connector
Components). Remove the cable from any clips and lift out of the