Dell Dimension E520 Service Manual page 48

Removing and Installing Parts: Dell Dimension E520 Service Manual
1 alignment bar
4 alignment guide
10. Ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
11. If previously removed, snap the card retention mechanism into place, securing the x16 PCI card.
1 card retention door
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer
cover from closing properly or cause damage to the equipment.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
12. Replace the computer cover (see
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
2 fully seated card
5 bracket within slot
2 card retention mechanism
Replacing the Computer
3 not fully seated card
6 bracket caught outside of slot
3 release tabs (2)
Cover).