Power Cable Connectors; Connecting And Disconnecting Drive Cables; Removing Drive Inserts - Dell OptiPlex 760 Service Manual

1 data interface cable connector
2 data interface connector

Power Cable Connectors

1 power cable 2 power input connector

Connecting and Disconnecting Drive Cables

When removing a cable with a pull-tab, grasp the colored pull-tab and pull until the connector detaches.
When connecting and disconnecting a cable without a pull tab, hold the cable by the black connector at each end.
Drive Inserts
Your computer will come with a plastic insert with shoulder screws and a metal insert.

Removing Drive Inserts

If you are installing a new drive:
1. Follow the procedures in Working on Your
2. Remove the computer cover (see
3. Lift the drive release latch.
4. Slide the metal bracket toward the back of the computer and lift up.
Computer.
Removing the Computer Cover).