Removing The Media Card Reader - Dell OptiPlex 760 Service Manual

1 floppy drive
3 shoulder screw slots (2)
4. Attach the power and data cables to the floppy drive and to the system board.
1 power cable
3 floppy drive connector (DSKT)
5. Replace the computer cover (see
6. Enter system setup (see System
7. Verify that your computer works correctly by running the Dell Diagnostics (see
Media Card Reader
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

Removing the Media Card Reader

1. Follow the procedures in Working on Your
2. Remove the computer cover (see
2 shoulder screws (4)
2 data cable
Replacing the Computer Cover).
Setup), and use the Diskette Drive option to enable your new floppy drive.
Computer.
Removing the Computer Cover).
Dell Diagnostics).