2 top display-cable connector
3 pull-tab on bottom flex-cable
connector
9. Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.
Display Latch
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1. Remove the keyboard.
2. Remove the
display
assembly.
3. Remove the
display
bezel.
4. Remove the two M2.5 x 4-mm screws that secure the display latch bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
1
top cover
2
M2.5 x 4-mm screws (2)
3
display latch bracket
Back to Contents Page
and pull-tab)
8M669
6240E