"Compaq.com - Compaq Presario 1660 Model Maintenance and Service Guide -
COMPAQ
MSG Index
Illustrated Parts Catalog
Service Considerations
Listed below are some of the considerations that you should keep in mind during the
disassembly and reassembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, then
returned to their proper locations.
As each subassembly is removed from the computer, it should be
IMPORTANT:
placed away from the work area to prevent damage.
Return to Removal & Replacement Procedures
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20checked%20ok/NOTEBOOKS/PRESARIO%201660/service.html (1 of 2)6/27/2004 3:00:45 AM
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US |
SEARCH
Maintenance & Service Guide
Presario 1660 Model
|
Home Page
|
Notice
Troubleshooting
|
Removal & Replacement Procedures
Pin Assignments
|
Preface
|
Product Description
|
Battery Pack Operations
United States
June 27, 2004
|
Specifications
|