Compaq Evo N800c Series Service Manual page 133

Removal and Replacement Procedures
5. Remove the MultiBay device by following these steps:
a. Turn the notebook bottom side up with the right side
b. Slide and hold the MultiBay release latch toward the
c. Use the notch in the MultiBay device to slide the device
d. Remove the MultiBay device.
Figure 5-4. Removing a MultiBay Device
Reverse the above procedure to install a MultiBay device.
5–6
facing forward.
front of the notebook
out of the MultiBay
1 (Figure 5-4).
.
2
Maintenance and Service Guide