During Washing; Changing A Program; Add A Garment / Interrupting The Program; Canceling Active Program - Bosch WFMC4300UC/0 Operating Instructions Manual

During Wash-
ing
D Due to the highly engineered
suspension of this appliance,
it may experience a shudder
or shake when progressing
from lower to higher spin
speeds. This behavior is
normal due to shifting of the
drum system and should not
cause concern.
Changing a program
1_7 Turn the program selector to
Off.
1_7 Turn the program selector to a
newly selected program.
The Start/Pause indicator light
flashes.
1_7 If required, change the settings;
see from Page 19.
1_7 Press the Start/Pause button.
The program starts.
The indicator light is lit.
Add a garment /
Interrupting the
program
You can put laundry in the drum af-
ter washing begins, take laundry
out of the drum early or interrupt the
program at any time.
D It is not recommended to add
laundry after the washing phase
is complete.
D You can add or reduce laundry
as long as the Start/Pause
indicator light flashes (red).
Press the Start/Pause button.
The Start/Pause indicator light
flashes.
Open the door.
Place/remove the laundry.
Close the door.
1_7 Press the Start/Pause button.
The program continues.
The indicator light is lit (red).
%
%
When the Start/Pause
indicator light is lit (red), the
program can be interrupted,
however the door cannot be
opened for safety reasons
(water level, temperature or
speed too high).
If the spin speed is too high, the
Start/Pause indicator light is lit
(red). Laundry can be added in
"Pause" mode when the drum
is at a standstill.
Canceling an active
program
If you would like to terminate a
program and remove the laundry:
%
If a program is interrupted at a
high temperature, leave the
laundry to cool down until the
glass is cool to touch.
Turn the program selector to
Off.
%
Turn the program selector to
Drain or Spin.
For Spin, select the desired
spin speed (but not no final
spin).
Press the Start/Pause button.
%
%
Wait until this program ends.
Open the door.
Unload the laundry.
If a program is interrupted at a
high temperature, the door may
remain locked until the
appliance has cooled down.
If the program is terminated by
switching off the appliance, the
door may remain locked.
After Washing
The Start/Pause indicator light
goes out.
0"00 appears in the display.
0
Open the door.
,e,m,.0nt P,eSS_ A ,0gnl,,/Cnttnn
,o, o!
SpeedMix _10rain ........
Rinse & Spin
Turn the program selector to
Off.
Close the taps.
Remove the laundry.
If "No final spin" preselected
The Start/Pause indicator light
flashes.
1_7 Turn the program selector to
Drain. The Start/Pause
indicator light flashes.
1_7 Press the Start/Pause button.
The indicator light is lit.
1_7 When this program has ended,
open the door.
Turn the program selector to
Off.
Close the taps.
Remove the laundry.
Leave the loading door ajar to
allow the inside of the washing
machine to dry.
22