What To Do When - Kenmore 385. 18630890 Service Manual

SEWING MACHINE DIV20 MODEL 385_ 18630890
WHAT TO DO WHEN
CONDITION CAUSE REFERENCE
I, SKIPPING
STITCHES
2. FABRIC NOT
MOVING
1. NEEDLEISNOr INSERTED
PROPERLY.
2. NEEDLEISBENTOR WORN.
3o INCORRECTLYTHREADED.
4. NEEDLEOR THREADARE
INAPPROPRIAIE FOR
FABRIC BEING SEWN.
5. SEWING ON STRETCH
FABRIC.
6. PRESSER FOOT PRESSURE
ISTOO WEAK.
7, INAPPROPRIATE NEEDLE
BAR HEIGHT,
8. INAPPROPRIATENEEDLE
TO SHUTTLE TIMING.
9. INAPPROPRIATENEEDLE
TO SHUTTLE CLEARANCE.
1. PRESSER FOOT PRESSURE
ISTOO WEAK
2 INCORRECT F D HEIGHT_
3. F.D. IS IN DOWN POSITION.
4. THREADON BOTTOM SIDE
OF FABRIC IS JAMMED UP.
5. FEEDDOG TEEIHARE
WORN.
HOW TO FIX
INSERT THENEEDLEPROPERLY.
CHANGE THENEEDLE
RETHREAD.
USETHE RECOMMENDED
SDNING NEEDLEAND THREAD
USEA#11 BLUETIPNEEDLE.
ADJUST THEPRESSER BAR
LEVELTO MAKE THE
PRESSURE STRONGER.
SEEMECHANICAL
ADJUSTMENT
"NEEDLEBAR HEIGHT _,
SEEMECHANICAL
ADJUSTMENT
"NEEDLETO SHUTTLE TIMING"
SEEMECHANICAL
ADJUSTMENT_NEEDLE
CLEARANCE TO SHUTTLE. _
ADJUST THEPRESSER BAR
LEVELTO MAKE THE
PRESSURE STRONGER.
SEEMECHANICAL
ADJUSTMENT_FEEDDOG
HEIGHT._
RAISETHE F.D. LEVEL.
MAKE SURETO BRING
BOTH NEEDLEAND BOBBIN
THREAD UNDER THEFOOT
WHEN STARTINGSEWING
CHANGE THE FEEDDOG
P.22, 23
P.24, 25
P.26
P.20, 21