Basic Needleposition - Kenmore 385. 18630890 Service Manual

SEWING MACHINE DIV20 MODEL 385. 18630890
MECHANICAL ADJUSTMENT
BASIC NEEDLEPOSITION
* IF THE LEFTNEEDLE POSITION IN MAXIMUM ZIGZAG AND IN STRAIGHTSEWING IS NOT
THESAME, ADJUST AS FOLLOWS:
ADJUSTMENT PROCEDURE:
I_ REMOVE THE BELTCOVER (SEEP.8)
2 SELECTTHE LEFTNEEDLE POSITION IN MAXIMUM ZIG ZAG_ THEN SELECT THE LEFTNEEDLE
POSITION STRAIGHT SEWING.
3. IF THE RESULT LOOKS LIKE(A) BELOW_ TURN THE ADJUSTING SCREW IN DIRECTION (D)_
tF THE RESULT LOOKS LIKE(B) BELOW, TURN THE ADJUSTING SCREW tN DIRECTION (C)_
4 REPLACE THE BELTCOVER (SEEP.8)
(D)
CC:)
NEEDLE POSITION IN
MAXIMUM ZIGZAG
NEEDLE POSITION IN
STRAIGHTSEWING
I
CA) CB)
CO_T INCORREC T INC ORREC T
34