Compass - Honda 2011 Odyssey Manual

Compass

U.S. EX models
EX-L and Canadian EX models
3. Turn the selector knob to select
''CALIBRATION.''
476
U.S. EX models
EX-L and Canadian EX models
4. Press the selector knob to enter
your selection. The display shows
you ''PUSH CAL START'' or ''Start
Calibration.''
While setting the compass, press
the RETURN button to go back to
the previous display. Pressing the
SETUP button will cancel the
compass setting mode.
2011 Odyssey
5. Press the selector knob. The
compass display is blinking and
the CAL indicator is shown.
6. Drive the vehicle slowly in two
complete circles.
When the calibration is successfully
completed, the CAL indicator goes
off and the compass display will stop
blinking and show an actual heading.
The audio system is not related to
the compass system. Even if the
compass system is calibrating, the
display returns to the normal display
which you last selected.