To Customize The Power Sliding Doors Setting - Honda 2011 Odyssey Manual

To Customize the Power Sliding
Doors Setting
MAIN SWITCH DRIVER'S SIDE
DASHBOARD SWITCH
DRIVER'S SIDE
POWER SLIDING
DOOR BUTTON
You can customize the power sliding
doors button on the remote
transmitter to not open the sliding
doors without unlocking the sliding
doors lock first.
When you customize the setting,
make sure your vehicle is parked
safely, the parking brake is applied,
all doors are fully closed and locked,
the key is removed from the ignition
switch, and the power sliding door
MAIN switch is set to the OFF
position.
There are two settings you can
choose from:
LED
ANYTIME The sliding door
unlocks and opens when you press
and hold the sliding door button on
the remote transmitter for 1 second.
The front door on the same side also
unlocks at the same time.
WHEN UNLOCKED
you must unlock the sliding door
before opening it.
You can switch between these two
modes as following:
1. Press and hold the driver's side
sliding door dashboard CLOSE
switch.
2011 Odyssey
2. Keep pressing the dashboard
switch, press and hold the driver's
side power sliding door button on
the remote transmitter until the
LED on the remote flashes (for 1
second).
3. Release the dashboard switch.
4. Follow steps 1 through 3 within 20
seconds and repeat it four times.
To go back to the other setting,
repeat the above procedure.
In this mode,
When the ''WHEN UNLOCKED''
mode is set, you will hear 3 short
beeps.
When the ''ANYTIME'' mode is
set, you will hear a long beep.
Sliding Doors
CONTINUED
171