Elapsed Time; Average Speed; System Messages - Honda 2011 Odyssey Manual

ELAPSED TIME

This shows the accumulated
traveling time since you last reset it.
When you turn the ignition switch to
the ON (II) position, ELAPSED
TIME is reset.
If you want to reset the ELAPSED
TIME manually, go to the trip
computer's ELAPSED TIME display,
and press and hold the SEL/RESET
button until the number resets.
You can customize the ELAPSED
TIME reset conditions on the multi-
information display (see page

AVERAGE SPEED

This shows the average speed you
are traveling in miles per hour (mph)
for U.S. models or kilometers per
hour (km/h) for Canadian models.
To reset the AVERAGE SPEED you
have traveled, press and hold the
SEL/RESET button until the
number resets.

System Messages

SYSTEM MESSAGE INDICATOR
107 ).
If there is a problem with your
vehicle, for example the engine oil
level is low or a door is not fully
closed, the multi-information display
will show you the problem. It does
this by interrupting the current
display with one or more messages.
2011 Odyssey
Multi-Information Display
The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go off until the problem(s)
is corrected.
You will also hear a beep when the
system message comes on for the
first time.
If there are several messages, each
message is displayed for about 5
seconds.
To switch the message(s) before 5
seconds elapsed or select the normal
display, press the INFO ( / )
button on the steering wheel
repeatedly.
89