Honda 2011 Odyssey Manual page 663

Hide thumbs Also See for 2011 Odyssey:

Table of Contents

Changing a Flat Tire

ATTACHMENT POINT

CARPET PIECE

PLASTIC SCREW

Return the third row seat to an

upright position.

You will find a U-shaped carpet

piece behind the seat bottom of

the third row seat. Pull up the

U-shaped carpet piece, fold it, and

tack the end under the carpet.

Unfasten the plastic screw with a

TIRE MOUNTING WING BOLT

BRACKET MOUNTING WING BOLT

Install the bracket and the bracket

mounting wing bolt on the

attachment point as shown, and

tighten the bolt. Make sure the

bracket is securely tightened.

2011 Odyssey

Install the flat tire on the bracket

with the inside of the wheel facing

toward you. Install the tire

mounting wing bolt to the bracket

through one of the five wheel nut

holes as shown. Poke a hole in the

vinyl bag as needed. Secure the

flat tire by tightening the tire

mounting wing bolt.

Store the jack and tools in the tool

kit case, then store the case in the

spare tire well.

Store the plastic screw in a

noticeable place.

Make sure to reinstall the plastic

screw after the flat tire is repaired

and installed on the vehicle.