Table of Contents
Advertisement
Required Steps
NI ONLY
These instructions are intended mainly for System
Administrators, service personnel or end users who
are installing the terminal.
Installation involves four main steps:
•
Connecting the set to the network.
It' s necessary to determine the type of Telephone
Company switching equipment in use for
proper connection to the Telephone Company
network. Implementation procedures vary from
one manufacturer to another.
Switch
Manufacturer
DMS-100
Nortel
5ESS
Lucent
EWSD
Siemens
5E Custom Lucent
•
Setting-up Service Profile IDentifiers (SPIDs).
•
Loading network data.
accomplished by two methods: 1) The most
common method is downloading of features
from the switch, or 2) In unusual situations,
manual configuration of multifunction buttons.
•
Programming and labeling the set. (Labeling
the set is described in Chapter 6.)
UNA
L-DIR
1
2
Standard Softkey Layout
CHAPTER 5
INSTALLATION
National ISDN
This may be
CLEAR
OPTIONS
Menu
3
4
5-1
5
Advertisement
Table of Contents
