Replacing The Light Bulb; Preparing For Vacation - GE GTR10GBEWW Owners And Installation Manual

Bulb
Lamp
cover

Replacing the Light Bulb

NOTE: Turn off the appliance or disconnect
the electricity at the main power supply before
removing the light bulb. Failure to do so could
result in electric shock or personal injury.
Unplug the refrigerator.
Remove the shelves (if necessary).
The light bulb is located behind a light lens
in the ceiling of the refrigerator section. The
light lens is snapped in. To remove the light
lens, use a flat head screw driver to push
one of the tabs
Unscrew the light bulb from the socket.

Preparing for Vacation

For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one tablespoon
(15 ml) of baking soda to one quart (1 liter) of
water. Leave the doors open.
Preparing to Move
Remove food and unplug the refrigerator.
Secure all loose items such as shelves and
drawers by taping them securely in place to
prevent damage.
Replace the bulb with a 25W/120V
appliance bulb.
WARNING!
Using a bulb rated higher than 25W/120V
may damage the control housing and light
lens.
Replace the light lens.
Be sure the refrigerator stays in an upright
position during moving.
GEAppliances.com
7