Setting Hard Disk Boot Priority; Information - Belkin F5U198V User Manual

Installing Driver in a "Fresh" Installation of Windows
5. Insert the F5U198 driver diskette into your floppy drive and press "Enter".
6. Press "Enter" to select the "Silicon Image SiI 3112 SATARaid Controller".
7. After the driver has been installed, press "Enter" and continue the Windows
installation procedure as normal.
8. During the operating system installation, Windows may ask you for the drivers for
the SATA card again during the "Driver Installation" part of the install. Please be
prepared with the floppy disk that was supplied with the card.

Setting Hard Disk Boot Priority

If you have an IDE and serial ATA hard drive installed in your system at the same time,
it is necessary to select one of the drives as the default boot drive. To set the boot
drive priority, you must access your computer's BIOS Setup Utility. Select "SCSI" to
boot from SATA hard disk, or select "HDD" to boot from IDE hard disk.
8
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole
responsibility that the product:
F5U198ea
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U198, to which this declaration
relates, is in conformity with Generic Emissions Standard EN50081-1 and with Generic Immunity Standard
EN50082-1 1992.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If
a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is
returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer
from whom you purchased the product. Proof of purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin
serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER
ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this
warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY
PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.

Information

9