Selecting Waypoints Nearest To The Cursor - Magellan MAP330 - MapSend CD For Meridian User Manual

Reference
Reference
1
2
ENTER
ESC
3
ENTER

Selecting Waypoints Nearest to the Cursor.

Screen section, the Map Screen has two modes of operation, position
and cursor. If you are in the cursor mode you may want to know what
waypoints are near your cursor rather than the ones nearest to your
present position. You can do this by selecting the "Find By" option of
Near Cursor. You are then presented with a list of waypoints that are
close to the cursor for the category you selected.
After the list is presented, you can use the Up/Down arrows to highlight
a waypoint, and press ENTER to view information on it. When
highlighting a waypoint, the bearing and distance from the cursor to the
waypoint is displayed at the bottom of the list.
Note: The "Find By" option Near Cursor is only available when the
Map screen is in the Cursor Mode.
40
As discussed in the Map
Magellan MAP 330 GPS Receiver