Customizing The Data Fields; Position Screen; Selecting The Position Screen; Resetting The Trip Odometer - Magellan MAP330 - MapSend CD For Meridian User Manual

Map330 series

Hide thumbs Also See for MAP330 - MapSend CD For Meridian:

Table of Contents

Customizing the Data Fields — Allows you to change the data that is

being display to 1 of 13 data options (bearing, distance, speed, heading,

VMG, CTS, ETA, ETE, XTE, turn, elevation, time, or date) for any of

the four fields. (See explanation of Data Types in the Map Screen

section.)

The Position screens 1 and 2 display your present position using the coordinate

systems that you have selected in Setup. The Position 1 screen shows all of the

basic position, time and satellite information on one screen. In addition, current

navigation information is shown in the bottom half of the screen.

Selecting the Position Screen — Use the Left or Right arrows to switch

between the two position screens. This allows the same position to be

displayed in different coordinate systems. This is useful when

comparing navigation data between devices and charts that use different

coordinate systems.

You can change the coordinate system displayed by following the

instructions in Setup - Selecting the Coordinate System.

Resetting the Trip Odometer — Resets the trip odometer to 0000.00.

Magellan MAP 330 GPS Receiver

ENTER

Customize

ENTER

Reset Trip

Reference

ENTER

Table of Contents

Need help?

Do you have a question about the MAP330 - MapSend CD For Meridian and is the answer not in the manual?

Map 330m