Waypoints / Database; Accessing Waypoints In The Database; Selecting Waypoints From The Nearest List; Selecting Waypoints From The Alphabetical List - Magellan MAP330 - MapSend CD For Meridian User Manual

Accessing Waypoints in the Database — All stored waypoints, whether
user-input or preloaded, can be found in the Waypoint Database. You
will need to access waypoints in the database whenever you are editing
waypoints, activating a GOTO route or creating a multileg route.
MENU

Selecting Waypoints from the Nearest List.

If Near Position is selected as the "Find By"
option for the database or if User was selected as
the category, you will be presented with a list of
waypoints that you can choose from. The
information at the bottom of the screen
indicates the bearing and distance to the
highlighted waypoint from your present
position.

Selecting Waypoints from the Alphabetical List.

If Alphabetical is selected as the "Find By" option
for the database a slightly different screen from the
Nearest list is displayed. Since this list can be
quite extensive, a "quick-find" box is added at the
top of the display to speed up the search. The
information at the bottom of the screen indicates
the bearing and distance to the highlighted
waypoint from your present position or cursor if
in the Cursor Mode.
Note: When selecting the User category, the MAP 330 does not use the
list with the "Quick-Find" box.
Magellan MAP 330 GPS Receiver
ENTER
Database
ENTER
ENTER
Reference
39