Sony DVO-1000MD Instructions For Use Manual page 61

Message
Monitor screen
ABNORMAL SETTINGS
SELECTED IN SETUP MENU.
SET ITEMS IN THE SETUP MENU TO
THE APPROPRIATE VALUES. CONTACT
SERVICE IF THIS ALARM APPEARS
AGAIN AFTER ABOVE PROCEDURE.
NO DISC.
INSERT A DISC.
DISC CANNOT BE PLAYED BACK.
USE DISC WITH NTSC RECORDING.
DISC CANNOT BE PLAYED BACK.
USE DISC WITH PAL RECORDING.
NOT SUPPORTED DISC.
USE DVD+RW DISC.
LOADING TIME OVER.
DISC ERROR.
RECOVERING THE DISC.
PLEASE WAIT.
CANNOT RECOVER.
CHANGE THE DISC.
FINALIZING THE DISC.
PLEASE WAIT.
CANNOT FINALIZE THIS DISC.
CHECK THE DISC.
FORMATTING THE DISC.
PLEASE WAIT.
CANNOT FORMAT THIS DISC.
Front panel display
ILL. SETUP!
NO DISC!
PAL DISC!
NTSC DISC!
Not supported!
LOADING ERROR!
DISC ERROR!
Recovering...
Can't Recover!
Finalizing...
Fin. Failed!
Formatting...
Init. Failed!
Cause and remedies
The settings made using the SETUP MENU are wrong.
Push any button to make the alarm message disappear,
then perform the following operation.
tCorrect the SETUP MENU settings (see page 52). If
the settings made are deactivated again or this
message appears again, contact your nearest Sony
dealer.
There is no disc loaded.
tLoad a disc.
A disc recorded using the PAL video signal system has
been loaded in the unit with the NTSC video signal
system set as the default.
tLoad a disc recorded using the NTSC video signal
system.
A disc recorded using the NTSC video signal system has
been loaded in the unit with the PAL video signal system
set as the default.
tLoad a disc recorded using the PAL video signal
system.
A disc that cannot be used with the unit has been loaded.
The message disappears when the disc tray is opened.
tUse a DVD+RW disc that can be used with the unit.
The unit cannot recognize the disc.
tCheck the disc or replace the disc with another one.
The unit failed in accessing the disc.
tCheck the disc or replace the disc with another one.
The disc is being recovered.
tWait until the message disappears.
The unit failed in recovering.
tReplace the disc with another one.
The unit is finalizing the disc.
tWait until the message disappears.
The unit failed in finalizing.
tReplace the disc with another one.
The disc is being formatted.
tWait until the message disappears.
The unit failed in formatting.
tReplace the disc with another one.
61
Messages