Location And Function Of Parts; Front Panel - Sony DVO-1000MD Instructions For Use Manual

Location and Function of Parts

Front Panel

1
(on/standby) switch and indicator
1
5 REMOTE 2 connector
4 REMOTE 1 connector
1 1 (on/standby) switch and indicator
Press to power on the unit when the MAIN POWER
switch (see page 16) on the rear panel is turned on.
This causes the front panel display to light. Even if
the unit is in standby mode, the indicator is lit in
green when the MAIN POWER switch is set to on.
To set the unit to standby mode, press this switch
again.
Note
If the MAIN POWER switch on the rear panel is
not set to on, the unit will not turn on even if you
press the 1 (on/standby) switch.
2 Disc tray
Used to insert or remove the disc.
3 OPEN/CLOSE button
Press to open or close the disc tray.
2 Disc tray
7 Disc control section
6 Front panel display
3 OPEN/CLOSE button
8 Menu/disc control section
4 REMOTE 1 connector (stereo mini jack)
Connect a SVRM-100A remote control unit (not
supplied) to this connector for remote control.
5 REMOTE 2 connector (mini jack)
Connect a foot switch (not supplied) to this
connector. You can control recording and pausing
using this foot switch.
Location and Function of Parts
13