Protecting A Title - Sony DVO-1000MD Instructions For Use Manual

To verify or edit the title information
5
Press the b button.
The name or information of the title selected in step
3 is displayed.
When "TITLE NAME" is selected:
Title name currently displayed
Title name automatically recorded on the disc
When "TITLE INFO" is selected:
Title name
Title information
To edit the title name and information
You cannot edit titles and information on this unit.
To edit them, connect an RS-232C remote control
device (not supplied) to the unit.
For detailed information on how to use the RS-
232C remote control device, see "To use the
48
Editing Titles
keyboard of an RS-232C remote control device for
editing/adding title name and information" on page
34.
When you finish editing:
Press the SET button on the unit after carrying out
editing task using an RS-232C remote control
device.
The message "SAVING..." appears on the front
panel display while the title name or title
information is being saved. On the monitor display,
"THIS TITLE IS CHANGING INFORMATION.
PLEASE WAIT" appears while the tile name or
title information is being saved.
To verify information from another title
Press the LIST button. The screen returns to the one
in step 3.
Then, push the B button so that the screen returns to
the one in step 2.
Finally, repeat steps 2 and 3 to verify information
from another title.

Protecting a Title

The TITLE LIST display allows you to protect titles
from accidental erasure or to prohibit indexes from
being added to or erased from titles.
Proceed as follows.
1
Load the disc on which titles that you want to
protect are recorded.
2
Press the LIST button.
TITLE LIST display appears.
The list of titles is displayed.
3
Select the title that you want to protect from the list
by pressing the V or v button. Then, press the b
button.