System - MULTIQUIP MAYCO LS600 Operation And Parts Manual

RECOMMENDED SHOTCRETE SYSTEM
NO. PART NO.
1 EM28906
2 EM25837
3 EM28905
4 EM402552
5 EM28061
6 EM289035
7 EM28001DD
8 EM23815D
9 EM28902
10 EM23101
11 EM28131D
12 EM24841
13 EM23808D
14 EM23806
15 EM23807
GENERAL RECOMMENDATIONS
■ If the site will permit, use steel pipe from the pump to
the pool perimeter. It will reduce line pressures which
is highly recommended.
■ The vibrator on the reducer by the pool improves
pumpability.
■ Turn both air vibrators off whenever the pump is stopped
to prevent separation of mix.
■ The air vibrators are low consumption (4.2 scfm).
■ Leave the air on at the nozzle when the pump is stopped
to prevent clogging of air the hoses in the air insert.
■ Use item #11 (steel elbow) at the edge of the pool to
prevent collapse of the rubber hose, which can cause
blockage.
MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11) — PAGE 83
APPENDIX — RECOMMENDED SHOTCRETE SYSTEM
PART NAME
COUPLING, 5" H-D "CF"
ELBOW, 5"x4"x90°
COUPLING, 4" H-D w/GASKET & PIN
REDUCER, 4"x2.5"x53" H-D ENDS
PIPE, 2.5"x120w x 10' H-D
COUPLING, 2.5" H-D w/GASKET & PIN
REDUCER, 2.5"x2"x36" H-D
REDUCER, 2.5"x2" w/AIR VIBRATOR
COUPLING, 2" H-D w/GASKET & PIN
AIR VIBRATOR ASSY.
2"x2" ELBOW 90º
HOSE, 2"x25' H-D w/ENDS
NOZZLE ASSEMBLY, 2" H-D
NOZZLE TIP, RUBBER 1-3/8"
NOZZLE TIP, RUBBER 1.25"
QTY. REMARKS