Digital Readout Screen - MULTIQUIP MAYCO LS600 Operation And Parts Manual

PRIMARY SCREEN
Screen 1
Indicates the various modes of the switch settings.
Monitors engine RPM - Idle speed 900, High speed 2550.
Battery charge indicator - Normal charge 13+ volts.
Indicates electrical malfunction - Refer to Troubleshooting
section.
SECONDARY SCREENS
Screen 2
Displays the position of the VOLUME CONTROL switch by indicating
whether the increase or decrease position is on or off.
INDICATES VOLUME
SWITCH IS NOT IN
THE - POSITION
FLOW DEC OFF
FLOW INC ON
Screen 3
Displays the number of hours the engine and pump have
been used and the number of faults the pump has registered.
All three indicators can be reset to zero by the RESET switch
on the control panel.
INDICATES NO.
OF HOURS
ENGINE HAS
E HRS: 00000.0
BEEN USED
PMP HRS: 00000.0
FAULTS: 00000000
RESET TO CLEAR
MESSAGE OR
INSTRUCTION
Screen 4
Displays the number of strokes the main hydraulic cylinders
have gone through. This indicator can be reset to zero by
the RESET switch on the control panel.
INDICATES A
RUNNING
COUNT OF
NO. OF STROKES
STROKE CTR: 0000
PRESS RESET TO
ZERO STROKE CTR
MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11) — PAGE 21
LS600 PUMP — DIGITAL READOUT SCREEN
2
INDICATES VOLUME
SWITCH IS IN THE
+ POSITION
INDICATES NO.
OF HOURS
PUMP HAS
3
BEEN USED
INDICATES NO.
OF FAULTS
DETECTED
4
MESSAGE OR
INFORMATION
Screen 5
Displays the ON/OFF electrical signal status of the various
12 volt solenoids (Swing A circuit, Main A circuit, Main B
circuit).
INDICATES
SWING A
CIRCUIT IS OFF
SWING A OFF
MAIN A OFF
MAIN B OFF
INDICATES
MAIN B
CIRCUIT IS OFF
Screen 6
Displays the ON/OFF electrical signal status for the
Proximity Switch A, Proximity Switch B, Engine Fuel
Solenoid, and Unloader Solenoid.
INDICATES
PROXIMITY A
CIRCUIT IS OFF
PROX A OFF
PROX B ON
FUEL SOL OFF
UNLOADER OFF
INDICATES
UNLOADER
CIRCUIT IS OFF
Screen 7
Displays the number of times the main hydraulic cylinders
stroke and the yards per hour output. This indicator can be
reset to zero by the RESET switch on the control panel.
INDICATES
THROTTLE
IS ON
THROTTLE ON
STROKES: 20
STROKES/MIN 8.2
YDS/HR 10.7
INDICATES THE
NO. OF YARDS
PER HOUR
Screen 8
Displays the electrical status of the engine fuel solenoid. To
test the 12-Volt solenoid status, activate with the RESET
switch on the control panel.
TO TEST FUEL
SOL PRESS RESET
FUEL SOL OFF
INDICATES THE
FUEL SOLENOID
IS OFF
Screen 9
Displays the communication status of the (optional) radio
remote control. To activate a new remote control connection,
use the reset switch on the control panel.
RADIO ADDRESS
COMMUNICATING
PRESS RESET TO
LEARN A NEW ONE
IINSTRUCTION
OR MESSAGE
5
INDICATES
MAIN A
CIRCUIT IS OFF
INDICATES
PROXIMITY B
CIRCUIT IS ON
6
INDICATES
FUEL SOLENOID
CIRCUIT IS OFF
INDICATES THE
NUMBER OF
STROKES
7
INDICATES THE
NO. OF STROKES
PER MINUTE
INSTRUCTION
OR MESSAGE
8
INDICATES
THAT RADIO
9 REMOTE IS ON