Symbols Used In This Manual; About Maintenance; Warning Label; Screen Examples In This Manual - Fujitsu fi-5900C Getting Started

Where there is no distinction between the different
versions of the above operating system, the
general term "Windows " is used.
Adobe Acrobat
All the descriptions in this manual assume the
usage of Adobe Acrobat bundled with this
product. However, Adobe Acrobat may be
upgraded without notice. If the descriptions differ
from the screens actually displayed, refer to the
Acrobat's "Help".
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business
Division, Products Group
Solid Square East Tower, 580 Horikawa-cho,
Saiwai-ku, Kawasaki-shi Kanagawa 212-8563,
Japan
Phone : (81-44) 540-4538
All Rights Reserved, Copyright© PFU LIMITED 2006

About Maintenance

The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner
or an authorized FUJITSU Image Scanner service
provider to make repairs to this product.
Warning Indications Used In This
Manual
ARNI N G
This indication alerts operators to an
operation that, if not strictly
observed, may result in severe injury
or death.
This indication alerts operators to an
AUTION
operation that, if not strictly
observed, may result in safety
hazards to personnel or damage to
equipment.
iv
® ®
Adobe Acrobat

Symbols Used In This Manual

This symbol alerts operators to particularly
ATTENTION
important information. Be sure to read this
information.
This symbol alerts operators to helpful
HINT advice regarding operation.
A TRIANGLE symbol indicates that special care
and attention is required.
The drawing inside the triangle shows the
specific caution.
A CIRCLE with a diagonal line inside shows
action which users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
Outline characters on a colored background
show instructions users should follow.
R
It may also include the drawing that shows the
specific instruction.

Warning Label

The glass surface inside the ADF becomes hot
during the operation. Be careful not to touch the
glass surface inside the ADF.
Do NOT remove, stain or scratch the
ATTENTION
warning labels from the scanner.

Screen Examples In This Manual

The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the scanner
application you are using.
The screenshots in this manual were captured
from FUJITSU TWAIN32 scanner driver,
ScandAll 21 Image Capturing Utility Software,
FUJITSU ISIS scanner driver, QuickScan Pro™
image capturing software and Adobe
® ®
Acrobat .