Fujitsu fi-4220C2 Operator's Manual page 99

The Function No. display indicates alarm after
Symptom 8
the scanner is turned ON.
(When the scanner is just installed
on the place) Did you unlock the
shipping lock of the flatbed?
YES
Does the Function No. display
indicate any alarm after turning ON
the scanner again?
YES
If you cannot solve the problem
after taking measures, check the
items in "5.3 Items to check before
contacting the dealer where you
bought the scanner" and contact
the dealer or an authorized
FUJITSU service provider.
*) For details, refer to "Getting Started" 2.1 Installing the Scanner.
5.2 Remedying Typical Troubles
NO
Turn OFF the scanner and
unlock the shipping lock, then
turn ON the scanner again.(*)
NO
The scanner operation is
normal.
fi-4220C2 Image Scanner Operator's Guide
5
83