How To Use The Scanner Driver - Fujitsu fi-4220C2 Operator's Manual

1.5 How to Use the Scanner Driver

■ FUJITSU TWAIN32 Scanner Driver
FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image
scanner fi series by using application software that complies with the TWAIN standard.
The following describes the procedure with examples of ScandAll 21 for ordinary scanning by
using this driver software.
1. Procedure for Basic Scanning Operation
1) Startup the application.
From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and
click [ScandAll 21].
2) Select your scanner on the window below.
Select [Select Source] from the [Scan] menu.
3) Select the scanner to use, then click the [Select] button.
Select
or
then click the [Select] button.
4) Load the documents on the scanner.
For details on loading documents, refer to "1.2 Loading Documents on the ADF for
Scanning" (page. 3).
10
• [FUJITSU fi-4220C2dj] for FUJITSU TWAIN32 V9
• [FUJITSU TWAIN32] for FUJITSU TWAIN32 V8