Getusercommand (0X92) - DirecTV D10 Installation Manual

DIRECTV Set-Top Box Information for the Installer
Return Response
Return Value
Description

5.8 GetUserCommand (0x92)

Command Label
Command Byte
Input Parameter(s)
Return Data Stream
DIRECTV, Inc.
Version 2.2
Day Of Week: 0x01 to 0x07 (0x01=Monday....0x07=Sunday).
ACK_FCNOK : Always Success
0x0000 : Always Success
The STB executes this command by providing the current time in Universal Time
Coordinate (UTC) conditioned by time zone and daylight savings settings.
GetUserCommand
0x92
None
[Type] [Device] [Key]
*******************************************************************
Type:
0x00 Key Toggle
0x01 Key Down
0x03 Key Up
Device:
0x00 Front Panel
0x01 Remote
Key:
0xA0 Enter (key #38)
0xA1 Info (key #26)
0xA2 Active (key #27)
0xA3 List (key #29)
0xA4 Back (key #31)
0xA5 (-) (key #37)
0xC3 Select (key #36)
0xC5 Power ON (key #1)
0x9A Right Arrow (key #35)
0x9B Left Arrow (key #34)
0x9C Up Arrow (key #32)
0x9D Down Arrow (key #33)
0xD0 Power OFF (key #2)
0xD1 CH + (key #19)
0xD2 CH – (key #20)
Page 21 of 42
0xB0 Pause (key #43)
0xB1 Rewind (key #44)
0xB2 Play (key #45)
0xB3 Stop (key #46)
0xB4 FFWD (key #47)
0xB5 Record (key #48)
0xB6 Replay (key #49)
0xB7 Advance (key #50)
0xE0 Digit 0 (key #9)
0xE1 Digit 1 (key #10)
0xE2 Digit 2 (key #11)
0xE3 Digit 3 (key #12)
0xE4 Digit 4 (key #13)
0xE5 Digit 5 (key #14)
0xE6 Digit 6 (key #15)
0xE7 Digit 7 (key #16)
0xE8 Digit 8 (key #17)
0xE9 Digit 9 (key #18)
0xEA Red (key #39)
March 5, 2008
DTV-MD-0058