3M MP220 Operator's Manual page 93

™
3M Pocket Projector MP220
Editing a Table
Mouse Mode:
1 Press and hold the Menu button until the onscreen keyboard appears.
2 Make your changes using the onscreen keyboard.
3 When you are finished making changes, press Done.
Trackball Mode:
1 Press the Touch Sensor to enter the cell.
2 Press again to open the onscreen keyboard.
3 When you are finished making changes, press Done.
Exiting a Table Edit
Mouse Mode: Position the pointer outside the cell. Press the Touch Sensor to exit.
Trackball Mode: Press the Back button until the cell is highlighted again.
© 2012 3M. All Rights Reserved. 93
Using Trackball Mode,
use the Touch Sensor to
select a cell. The cell is
highlighted.
The cursor appears in
the cell.