3M MP220 Operator's Manual page 87

™
3M Pocket Projector MP220
3 Select the graphic:
Mouse Mode: Place the mouse pointer over the graphic.
Trackball Mode: Place the cursor beside the graphic and move the
trackball from left to right to highlight the graphic.
4 Press Touch Sensor to bring the graphic into the zoom state screen.
Mouse Mode: Click on the graphic and a plus and minus button
appears at the bottom of the screen. (The buttons disappear if you do
not use them within a few seconds.) Use the buttons to increase or
decrease the zoom level.
Trackball Mode: To increase or decrease the graphic size, you need
to use Mouse Mode. To change to Mouse Mode, hold down the Search
button and follow the instructions above.
5 Press the Back button to return to the document.
© 2012 3M. All Rights Reserved. 87
Move the cursor
next to the
graphic you
want to zoom.
Choose
Selection Mode.