Installing And Enabling Fiery Seequence Suite; Installing Seequence Software; Enabling Seequence Software - Fiery TASKalfa 3051ci Manual

F S
IERY

Installing and enabling Fiery SeeQuence Suite

The following sections describe how to install and enable SeeQuence Suite.

Installing SeeQuence software

SeeQuence Suite software is installed with Command WorkStation software. For information
about installing Command WorkStation software, see pages

Enabling SeeQuence software

SeeQuence Impose and SeeQuence Compose are dongle-protected features of Command
WorkStation that work in conjunction with Adobe Acrobat and the Enfocus PitStop plug-in.
You must install a special dongle on each computer that runs the SeeQuence software. This
section explains how to install the dongle and the required software.
You will need the following items:
•
Dongle:
– Fiery SeeQuence Impose kit
– Fiery SeeQuence Compose kit
– Fiery SeeQuence Suite kit, which includes SeeQuence Impose and SeeQuence
Compose (includes a single dongle)
N : If you purchased an earlier version of Impose or Compose, use the dongles that you
OTE
already own to enable SeeQuence Impose or SeeQuence Compose.
•
Adobe Acrobat/Enfocus PitStop DVD:
Contains installers for Adobe Acrobat and Enfocus PitStop, a plug-in module for Acrobat,
for Windows and Mac OS X.
You must install Acrobat on the same computer as the SeeQuence software to preview
N :
OTE
.ps files. You do not need Acrobat or PitStop to preview .pdf files.
Installing Command WorkStation installs the core SeeQuence software. If it is not already
installed, you must install Command WorkStation (see
Q S
EE UENCE UITE
A USB dongle included in one of the following kits:
7 and 13.
Included in the SeeQuence Suite option kits.
page 13).
24