Setting Passwords; Changing The E100 Default Language; Updating System And User Software; Before Updating The E100 - Fiery TASKalfa 3051ci Configuration

A
DMINISTERING THE

Setting passwords

You can set or change the passwords for users of the E100. Anyone who is a member of the
Administrators group can modify the Setup options and control the flow and order of print
jobs with the job management tools.
You can change the Administrator and Operator passwords from Configure or Command
WorkStation. For more information, see Configure Help. For information on how to access
Configure Help, see
The default administrator password is "Fiery.1". For more information about Administrator
and Operator passwords and the access privileges they allow, see
Keep track of the passwords that you set.

Changing the E100 default language

If you need to change the default language displayed on the E100 you can do so from
Configure.
T E100
O CHANGE THE
• Specify the language that you want to display on the E100 from Configure > Server > General
> Choose Server Language and click Apply.
Or select Configure > Server > General > Use Print Engine Language to allow the E100 to use
the language specified on the copier. If the copier language is not supported on the E100,
the E100 will use the default language, which is English.

Updating system and user software

Using the tools System Updates and Check for Product Updates (Software Downloads Site),
you can obtain updates to E100 System Software and User Software from a secure site on the
Internet (referred to throughout this documentation as the Update Server).

Before updating the E100

Keep in the mind the following before updating the E100 using System Updates or Check for
Product Updates:
• If the E100 is behind a firewall and unable to access the Internet, the site administrator can
configure a proxy server at the customer's organization to allow the E100 to receive
updates (see
• While updates are being installed, you cannot print to the E100. Schedule the automatic
updates when no one plans to print. While updates are being installed, the E100 may need
to reboot several times.
F C
IERY ONTROLLER
page 31.
DEFAULT LANGUAGE
page 41).
39
page 16.