C
ALIBRATION
Recommended paper
You can check the recommended paper for a particular output profile using Command
WorkStation and Calibrator.
T
O FIND THE RECOMMENDED PAPER AND PRINT SETTINGS FOR AN OUTPUT PROFILE
1 In Command WorkStation, in Device Center, go to Color Setup > Color Management.
2 Select the Output Profile and note the name of the calibration set displayed to the right.
3 In Device Center, go to General > Tools and click Calibrate.
Calibrator starts in a separate window.
4 Under Calibration Set, select Manage.
The Manage Calibration Settings window appears.
5 Select the calibration set from the list.
The recommended paper is displayed.
6 Click Cancel to close the window.
46