Fiery TASKalfa 3051ci Printing Manual page 17

Color
RGB=0,0,0
(All other RGB values are
unaffected by the Black Text
and Graphics setting.)
CMYK=0%,0%,0%,100%
(All other CMYK values are
unaffected by the Black Text
and Graphics setting.)
Spot Colors
(Spot colors are unaffected by
the Black Text and Graphics
setting.)
C W P O
OLOR ISE RINT PTIONS
N : Use the Black Text and Graphics option only when printing composites, not when
OTE
printing separations.
Black Text and Graphics = Normal
RGB=0,0,0 is printed according to the definition
for RGB=0,0,0 in the output profile. This may
be a rich black using all toners if the output
profile specifies a rich black, or may be K-only
if the output profile specifies K-only for
RGB=0,0,0. The output is affected by the
calibration curve.
CMYK=0%,0%,0%,100% may be printed as
K-only or as a rich black using all toners,
depending on the CMYK/Grayscale Source
setting.
If CMYK/Grayscale Processing Method is Pure
Primaries or if CMYK/Grayscale Source is
Bypass Conversion, CMYK=0%,0%,0%,100%
prints as 100% K and the amount of black toner
is limited by the CMYK/Grayscale Source profile
and the calibration curve.
If CMYK/Grayscale Processing Method is Full
(Output GCR), CMYK=0%,0%,0%,100% is
printed as a rich black using all toners according
to the output profile. The output is affected by
the calibration curve.
If CMYK/Grayscale Processing Method is Full
(Source GCR), CMYK=0%,0%,0%,100% is
printed as a rich black using all toners according
to the CMYK/Grayscale Source profile. The
output is affected by the calibration curve.
Setting CMYK/Grayscale Source to ColorWise
Off disables the CMYK Source profile and the
calibration curve. In this case, the black toner
is not limited by the calibration curve.
Standard spot color processing
PostScript applications, such as QuarkXPress, may convert elements defined as
N :
OTE
RGB=0,0,0 to four-color CMYK black before sending the job to the E100. These elements
are not affected by the Black Text and Graphics option. For more information, see
Reference.
Black Text and Graphics = Pure Black On or
Rich Black On
RGB=0,0,0 is printed as K-only, using the black
toner (Pure Black On) or 100% K plus 50%
Cyan (Rich Black On) using black and cyan
toners. All other RGB values are unaffected by
the Black Text and Graphics setting.
CMYK=0%,0%,0%,100% is printed as K-only,
using the black toner (Pure Black On) or 100%
K plus 50% Cyan (Rich Black On) using black
and cyan toners, regardless of the CMYK/
Grayscale Source and CMYK/Grayscale
Processing Method settings. All other CMYK
values are unaffected by the Black Text and
Graphics setting.
Setting CMYK/Grayscale Source to ColorWise
Off disables the CMYK source profile and the
calibration curve. In this case, the black toner
is not limited by the calibration curve.
Standard spot color processing
17
Fiery Color