Creating A Raid Set - Asus RAMPAGE III BLACK EDITION User Manual

Creating a RAID set

To create a RAID set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears:
[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
2. Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to
3.
select a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears:
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
4-30
Intel(R) Rapid Storage Technology - Option ROM - v10.1.0.1008
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume
Enter a unique volume name that has no special characters and is
[ SELECT DISKS ]
Select 2 to 6 disks to use in creating the volume.
[ CREATE VOLUME MENU ]
[ HELP ]
16 characters or less.
Chapter 4: Software support