Digi+ Vrm Duty Control [T.probe]; Pwm Volt. Control [Auto]; Load-Line Calibration [Auto]; Cpu Voltage Ocp [Enabled] - Asus RAMPAGE III BLACK EDITION User Manual

3.3.23

Digi+ VRM Duty Control [T.Probe]

[T.Probe]
[Extreme]
3.3.24

PWM Volt. Control [Auto]

Allows you to adjust the MOSFET driving voltage.
Configuration options: [Auto] [6V] [7V] [8V] [�V] [10V]
3.3.25

Load-Line Calibration [Auto]

Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
Configuration options: [Auto] [0% Calibration] [50% Calibration] [100% Calibration]
3.3.26

CPU Voltage OCP [Enabled]

Configuration options: [130%] [160%] [200%]
3.3.27

CPU PWM Frequency [Auto]

Configuration options: [Auto] [250KHz] [300KHz]—[�00KHz] [�50KHz] [1MHz]
3.3.28

Phase Control [Extreme]

[Standard]
[Extreme]
3.3.29

Extreme OV [Disabled]

[Enabled]
[Disabled]
3.3.30

Extreme OC [Auto]

Configuration options: [Auto] [Mode 1] [Mode 2]
3.3.31

CPU Voltage [Auto]

Allows you to set the CPU voltage. The values range from 0.85000V to 2.30000V
with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU VCore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
3.3.32

CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.20575V to
2.05375V with a 0.01325V interval.
3-14
Manages to achieve the optimum thermal performance for longer
component life.
Unleashes the power system to push the limit for extreme
overclocking.
Standard power saving.
Enables and maintains the active full stage phase array.
Enables the Extreme OV function.
Disables this function.
Chapter 3: BIOS Setup