Fujitsu ScanSnap S500M Operator's Manual page 86

■ Continuing/stopping scanning after an error
If an error such as the paper jam occurs while you scan a document containing more than one
pages, you will see the following message.
You can continue or stop scanning using the following procedure.
Operation
To continue scanning:
1. Check the last scanned page in the "Message" window.
2. Load the un-scanned pages back onto the ADF.
3. Click the [Continue scanning] button to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒
The following window appears.
2. Click the [Yes] button to delete the data of pages scanned before the error occur-
rence, or click the [No] button to save the data. (*Click the [Cancel] button to return to
the previous window.
70
)