Operation Button; Rear Side - Fujitsu ScanSnap S500M Operator's Manual

■ Operation Button

■ Rear Side

USB connector
SCAN
POWER
Seal (to remind you that the software has to be installed
before connecting to the personal computer)
After installing the software, remove this seal.
ScanSnap S500M Operator's Guide
1.1 Names and Functions of Parts
[SCAN] button
Press this button to start scanning.
[POWER] button
Hold down 1 sec. to turn on/off the power supply.
Power lamp
Indicates the scanner status.
Blue; Lighted: Ready
Blue; Blinking: Scanning
Orange; Lighted: Error
Light off: Power off
DC 16V
AC adapter
connector
3
1