Internal Card With Bluetooth® Wireless Technology - Dell Precision M2300 User Manual
Dell precision m2300 user's guide
Hide thumbs
Also See for Precision M2300:
- Quick reference manual (244 pages) ,
- User manual (160 pages) ,
- Service manual (43 pages)
Table of Contents
Advertisement
CAUTION:
Before performing the following procedures, follow the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
Before You
2. Remove the hinge cover (see
1
screws (3)
2
keyboard tabs (5)
4
pull-tab
5
keyboard-cable locking arm
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
3. Remove the three screws across the top of the keyboard.
NOTE:
Lift the keyboard carefully in
4. Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector.
5. If the keyboard cable is held in place by a keyboard lock arm next to the keyboard connector, carefully pivot the lock arm upward to uncover the cable.
6. Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on the system board.
NOTE:
When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.
Internal Card With Bluetooth® Wireless Technology
CAUTION:
Before performing the following procedures, follow the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in
Before You
2. Remove the hinge cover (see
Begin.
Hinge
Cover).
3
palm rest
6
keyboard cable connector
step 4
to ensure that you do not pull on the keyboard cable.
Begin.
Hinge
Cover).
Advertisement
Table of Contents
