Display Panel; Installing The Display Bezel - Dell Precision M20 Service Manual
Dell precision m20 service manual
Hide thumbs
Also See for Precision M20:
- Quick reference manual (168 pages) ,
- User manual (116 pages) ,
- Quick reference manual (164 pages)
Table of Contents
Advertisement
1
display bezel
2
display panel
3
display bumpers (6)
4
M2.5 x 5-mm screws (6)
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
7. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of the
bezel and rotating away from the top cover.
NOTE:
Follow the same procedure on all four sides of the display bezel until it snaps completely off.
Installing the Display Bezel
1. Starting at any corner, use your fingers to gently snap the bezel in place securing the display panel.
2. Replace the six M2.5 x 5-mm screws on the front of the bezel.
3. Replace the six display bumpers around the display assembly.
Display Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
Advertisement
Table of Contents
