Replacing The Mini Pci Card - Dell Inspiron XPS Gen 2 Service Manual
Service manual
Hide thumbs
Also See for Inspiron XPS Gen 2:
- Service manual (45 pages) ,
- Notice (34 pages) ,
- Quick setup (2 pages)
Table of Contents
Advertisement
NOTICE:
To prevent damage to the Mini PCI card connector, do not use tools to spread the securing clips that secure the card.
5. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.
6. Remove the Mini PCI card from the connector at a 45-degree angle.
1 Mini PCI card
2 metal securing tabs (2)
Replacing the Mini PCI Card
NOTICE:
To avoid damaging the antenna cables or the Mini PCI card, never place the cables under the card.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
1. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector until it clicks.
2. Connect the antenna cables to the Mini PCI card.
Advertisement
Table of Contents
