Table of Contents
Advertisement
• Onboard Parallel Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/
ECP+EPP
• PWRON After PWR-FAIL
This option will determine how the system will power on after a power failure.
The setting are: Former-sts (Formar states), ON and OFF
• Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
• Midi Port IRK setting are IRK5 or IRK10
• Power Status LED
This item determines which state the Power LED will use. The settings are
Blinking, Dual, and Single. During blinking, the power LED will blink when the
system enters the suspend mode. When the mode is in Dual, the power LED
will change its color. Choose the single and the power LED will always remain
lit.
To operate the onboard parallel port as Standard
Parallel Port only, choose "SPP." To operate the
onboard parallel port in the EPP modes simultaneously,
choose "EPP." By choosing "ECP", the onboard parallel
port will operate in ECP mode only. Choosing "ECP +
EPP" will allow the onboard parallel port to support
both the ECP and EPP modes simultaneously. The ECP
mode has to use the DMA channel, so choose the
onboard parallel port with the ECP feature. After
selecting it, the following message will appear: "ECP
Mode Use DMA" At this time, the user can choose
between DMA channels 3 or 1. The onboard parallel
port is EPP Spec. compliant, so after the user chooses
the onboard parallel port with the EPP function, the
following message will be displayed on the screen:
"EPP Mode Select." At this time either EPP 1.7 spec. or
EPP 1.9 spec. can be chosen.
43
Advertisement
Table of Contents
