Table of Contents
Advertisement
• PrimaryMaster/PrimarySlave
SecondaryMaster/Secondary Slave
Press PgUp/<+> or PgDn/<-> to select Manual, None, Auto type. Note that the
specifications of your drive must match with the drive table. The hard disk will
not work properly if you enter improper information for this category. If your
hard disk drive type is not matched or listed, you can use Manual to define your
own drive type manually.
If you select Manual, related information is asked to be entered to the
following items. Enter the information directly from the keyboard. This
information should be provided in the documentation from your hard disk
vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be
"None".
If the controller of HDD interface is CD-ROM, the selection shall be
"None".
Access Mode
Cylinder
Head
Precomp
Landing
Sector
Access mode
number of cylinders
number of heads
write precom
Zone landing zone
number of sectors
33
Advertisement
Table of Contents
