Replacing The Palm Rest; Procedure; Postrequisites - Dell Inspiron 13Z 5323 Owner's Manual

10
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Procedure

1 Align the palm rest with the computer base and gently snap the palm rest
into place.
2 Slide the hot-key board cable, power-button board cable, and touchpad cable into
the system-board connectors and press down on the connector latches to secure
the cables.
3 Replace the screws that secure the palm rest to the computer base.
4
Close the display and turn the computer over.
5 Replace the screws that secure the palm rest to the computer base.

Postrequisites

1 Replace the keyboard. See "Replacing the Keyboard" on page 25.
2
Replace the base cover. See "Replacing the Base Cover" on page 19.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.

Replacing the Palm Rest

Replacing the Palm Rest
29
|