Modem Connection; Pc Card Slot - Fujitsu Stylistic LT P-600 User Manual

Modem Connection

P O I N T S
• Actual speeds over U.S. telephone lines vary, and are less than
56Kbp due to the current FCC regulations and line conditions. The
internal modems on all Fujitsu pen tablets from Fujitsu PC
Corporation are only qualified for use with telephone systems in
selected countries, including the United States and Canada. For a full
list of certified countries, check www.fujitsupc.com/modems.
• The LAN portion of the internal LAN/modem module can only be
used when the system is used with the optional mini-dock; there is
no LAN port on the system itself.
The Stylistic LT P-600 pen tablet is designed to accept a standard RJ-11 telephone plug. Connect the
plug to the modem jack located on the right-hand side of the pen tablet, to the left of the DC Input
jack (reference Figure 1-1). The telephone plug can be installed whether or not the pen tablet has
power applied.
If you need assistance configuring the Stylistic LT P-600 pen tablet modem or LAN, contact your
local help desk or your reseller.

PC Card Slot

The Stylistic LT P-600 pen tablet PC Card slot allows you to install a Type II PCMCIA CardBus card.
To install a PC card, position the side with the arrow facing up (i.e., when looking at the tablet's
display side, the arrow on the card should be visible.) Slide the card into the PC Card slot, and press
it firmly to ensure proper seating.
If you need assistance installing a PC Card in the Stylistic LT P-600 pen tablet, contact your local
help desk or your reseller.
U s i n g t h e S t y l i s t i c L T P - 6 0 0
1
1
25