Media Setting - Oki C7500n Maintenance Manual

3.4.2.2 Media Setting

(1) The media thickness input screen is displayed.
Prepare four sensitivity adjustment transparency sheets (42404301) and enter the thicknesses
with which the transparency sheets are labeled.
• Make thickness entries in µm (simply type in the value that is indicated on each
Note:
transparency sheet). Enter the value of the short edge.
• Load the sheets in the multipurpose tray, in the order of their thickness entry (the media
of the first entered thickness is to be lowermost in the multipurpose tray).
Thickness Entry Order
4
3
2
1
(2) After the completion of the thickness entry of the fourth sheet, the ADJUSTMM screen is
shown.
Paper Orientation: Portrait
* Load four sheets of media so as that their measurement points are located at the front feeder
- plate hopper.
41955801TH Rev.8
Screen Display Tray Loading Order
sample 1= 4
sample 2= 3
sample 3= 2
Check data= 1
Measurement point
Four sensitivity Adjustment Transparency Sheets (42404301)
Transparency Sheet Appearance
Feed Order
MP try top 1
2
3
MP try bottom 4
Oki Data CONFIDENTIAL
PX713
PX711
Long Edge
Short Edge
xxx µm
xxx µm
DO NOT REUSE
Media Thickness Indication Label
Remarks
Sensitivity adjustment
1st sheet
Sensitivity adjustment
2nd sheet
Sensitivity adjustment
3rd sheet
Check sheet
100 /