Forwarding; Virtual Servers - TP-Link TL-WR841HP User Manual

To Reserve an IP address:
1. Click the Add New... button. Then Figure 4-30 will pop up.
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous
page.

4.8 Forwarding

Figure 4-31 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-31), Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.

4.8.1 Virtual Servers

Choose menu "Forwarding → Virtual Servers", you can view and add virtual servers in the
screen as shown in Figure 4-32. Virtual servers can be used for setting up public services on
your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all
requests from the Internet to this service port will be redirected to the computer specified by the
TL-WR841HP
Figure 4-30 Add or Modify an Address Reservation Entry
300Mbps High Power Router User Guide
- 44 -